ENG - 7
Up/Down/Left/
Right
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
• Music Skip
Press the Right button to select the next music le. Press the Left button to select the previous music le.
• ID SET
Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a wireless subwoofer or wireless
rear speakers).
Play / Pause
You can also play or pause music by pressing the button.
Mute
Press the
(Mute) button to mute the sound.
Press it again to unmute the sound.
LED indicator
Blinks X Repeatly
Info
Press the button to display information about the current function. (See page 4)
When connected to Dolby Atmos®, the LED indicator blinks cyan 3 times.
SOUND MODE
By pressing the button, you can select the desired audio mode. Each time the mode changes, the Multicolor LED blinks
in white.
LED indicator
White Blinks X1
Surround → Game → Standard → Adaptive Sound → DTS Virtual:X
• Surround : Provides a wider sound eld than standard.
• Game : Provides stereoscopic sound to immerse you in the action while gaming.
• Standard : Outputs the original sound.
• Adaptive Sound : Analyzes the content in real time and automatically provides the optimal sound eld based on the
characteristics of the content.
• DTS Virtual:X : Immersive 3D sound from any content.
VOLUME
Push the button up or down to adjust the volume.
LED indicator
White moves to right X1
Volume Up
White moves to left X1
Volume Down
WOOFER (BASS)
LEVEL
Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the woofer (bass)
volume level to 0 (Default), press the button.
Bluetooth PAIR
Switch the Soundbar to Bluetooth pairing mode.
When you press the button, the LED display changes as shown below.
• Until pairing is complete, the Multicolor LED changes as Red → Green → Blue in turn.
LED indicator
Red → Green →
Blue Blinks
Pairing
Cyan Blinks X3
Connection is complete
Ready to connect via Bluetooth.
To Next Page
Loading...
