Samsung HW-S80 D Series - Advanced Remote Functions

ENG - 8
CH LEVEL
By pressing the button, you can adjust the volume of the each speaker.
• To control the volume of the each speaker select “Center Level” or “Front Top Level” in Sound Settings, and then
adjust the volume between -6~+6 by using the Up/Down buttons.
• If the Rear Speakers (sold separately) are connected, the setting “Rear Level” and “Rear Top Level” is supported. To
adjust the volume of the “Rear Level” and “Rear Top Level” between -6 to +6 by using the Up/Down buttons.
‒ The Front Top Level and Rear Top Level functions are supported by HW-S80*D / HW-S81*D / HW-S81*GD model
only.
LED indicator
White Blinks X1
Center Level → Front Top Level
TONE CONTROL
By pressing the button, you can adjust the volume of the treble or bass sound. The dered item can be adjusted using
the Up/Down buttons. This function is enabled in Sound mode excluding in Standard mode.
• To control the volume of the treble or bass sound, select “Treble” or “Bass” in Sound Settings, and then adjust the
volume between -6~+6 by using the Up/Down buttons.
• Once the bass level is changed, the woofer level will be also adjusted accordingly.
LED indicator
White Blinks X1
Treble → Bass
Sound Control
By pressing the button, you can set the audio function. The desired item can be adjusted using the Up/Down buttons.
Each time the mode changes, the Multicolor LED blinks in white.
LED indicator
White Blinks X1
SpaceFit Sound → Active Voice Amplier → Voice enhancement →
Night Mode → Sync → Virtual
• Press and hold the
(Sound Control) button for about 5 seconds to adjust the sound for each frequency band.
150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be
adjusted to a setting between -6 to +6 using the Up/Down buttons.
(Make sure the Sound mode is set to “STANDARD”.)
• The SpaceFit Sound and Active Voice Amplier functions are not supported by HW-S70*D / HW-S71*D / HW-S71*GD
model.
• If the Rear Speakers (sold separately) are connected, the setting “Sound Grouping” and “Private Rear Sound” is
supported.
Setting the (Sound Control)
• SpaceFit Sound : This function analyzes the user’s listening space with the Soundbar’s microphone and provides optimal sound for the space.
For more information, refer to page 19.
• Active Voice Amplier : Analyzes external noise in real time while soundbar is playing so that voice audio can always be heard clearly.
‒ No data is saved during the analysis.
• Voice enhancement makes it easier to hear spoken dialog in movies and TV.
• Night mode is optimized for night time with the settings adjusted to bring the volume down but keep the dialog clear.
• Sound Grouping : The Soundbar main unit and the Surround Speakers play the entire sound instead of surround sound, making it ideal for
large groups of people listening to music in a large space.
‒ This menu is initially activated when the Surround Speakers are connected, and then the menu remains activated regardless of the
connection of the Surround Speakers.
‒ If you enable the Sound Grouping, there are no differences in sounds between the Sound modes.
‒ Sound does not come out from all speaker units of the Soundbar main unit and the Surround speakers, but only from certain
predetermined units, which varies by model.