ENG - 30
Installing the Ultra Slim Soundbar Skin
Caution
• This product is only for use with the Samsung Soundbar HW-S800B/S801B/S80CB.
• This product is a part attached to the exterior of the Samsung Soundbar HW-S800B/S801B/S80CB.
• C, D, E, F, and G are parts for wall mounting included in the HW-S800B/S801B/S80CB product. They are not provided with this product.
• Make sure to assemble/disassemble the replaceable cover by following the guide.
• The holder (B) that came with the product is a part for the wall mount. Make sure to use it.
• Be careful not to damage the product’s exterior with sharp objects.
• After attaching it, avoid impacts or pulling on it strongly since this may cause it to separate from the product.
• Be careful since there is a risk of damage due to the characteristics of the product material.
• Humidity, acetone, chemicals mixed with solvents such as alcohol, and exposure to high temperatures may cause stains, wrinkles, or
discoloration/deformation.
• It may become deformed if it gets wet. If the product gets wet, wipe off the moisture immediately with a dry towel, and then let it dry in a
wellventilated, shady area.
• Avoid places with high temperature or high humidity when storing the product. Direct exposure of the product to direct sunlight may change
its color or shape.
x 2
x 1
Soundbar HW-S800B/S801B/S80CB
AH81-15127A-01
A TYPE
:
740mm
B TYPE
:
700mm
x 4
F
x 2
x 2 x 2
1
2
AH81-15127A-01
A TYPE
:
740mm
B TYPE
:
700mm
5cm
3
To Next Page
Loading...
