Samsung i100 - LCD Brightness; LCD Save; Quick View; Start up Image

088
SETUP1 ( )
Start up image
You can select the image that is fi rst displayed on the LCD monitor
whenever the camera is turned on.
– Sub menus: [Off], [LOGO], [User Image]
– Use a saved image for the start-up
image with the [Start Image] in the
[RESIZE] menu in the play mode.
– The start-up image will not be deleted
by [Delete] or [Format] menu.
– The User images will be deleted by
[Reset] menu.
LCD brightness
You can adjust the LCD brightness.
– Sub menus: [Auto], [Dark], [Normal],
[Bright]
Quick view
If you enable Quick View before capturing an image, you can view the
image you just captured on the LCD monitor for the duration set in the
[Quick View] setup. Quick view is possible only with still images.
– Sub menus
[Off]: The quick view function
can’t be activated.
[0.5, 1, 3 sec] : The captured image is
briefl y displayed during
the selected time.
LCD save
If you set the [LCD save] to On and the camera isn’t operated during
the specifi ed time, the LCD monitor will be turned off automatically.
– Sub menus
[Off]: The LCD monitor will not be
turned off.
[On]: If the camera isn’t operated
during the specifi ed time (about
30 SEC.), the camera power
will be idle (Camera status
lamp:Blinking) automatically.
Back
Set
OK
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
OFF
Back
Set
OK
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Auto
Dark
Normal
Bright
Back
Set
OK
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Off
0.5 sec
1 sec
3 sec
Back
Set
OK
SETUP1
Language
Date&Time
Start Image
LCD
Quick View
LCD Save
Off
On