40
Ⅲ.ADJUSTMENT
2. ADJUSTMENT CAUTION
1) Basic Information of Adjustment
After changing the electronic parts of i7, the parts have to be adjusted in accordance withe the adjusted items.
The items listed on the table are have to be adjusted after changing.
1> To adjust the camera after changing the electronic parts, see the below table.
2> Equipment
▶ Equipments
- AE TESTER : AE TESET can test up to LV 16.7.
- POWER SUPPLY : 3.3V / 2A
▶ Chart
- Focus Chart
- Gray Chart(18%..Reflection Paper)
3> Adjustment program file
To adjust all items, all kinds of code by items have to be inserted in program file and saved them to the SD
card as TXT file type. The codes are listed below
MAIN POWER BARREL CCD
PCB PCB ASS’Y ASS’Y
FIRMWARE UPGRADE ●●
PUNT ADJ. ●●●
SHUTTER CLOSE TIME ADJ. ●●●
FLASH ADJ. ●●
BATTERY LEVEL ADJ. ●●
OB SETTING ●●
BURNING TEST & CCD DEFECT CELL
●●●●
EEPROM READ
EEPROM WRITE
To Next Page
Loading...
