Samsung i70 - Adjustmnet; Adj_Control Check_Process_Id 65535;; Adj_Control Progress_Sig_On; Adj_Control Progress_Sig_Start; Adj_Control Save_Log_File

58
Ⅲ.ADJUSTMENT
4) B/T LEVEL ADJ
After changing the MAIN PCB, adjust the Standard Voltage LEVEL.
<How to adjust>
a...Prepare the POWER SUPPLY.
b...Connect the camera to the POWER SUPPLY.
c...Set the voltage to 2.71V.
d...Download the adjustment file and save it to SD memory card.
e...Insert the SD memory card that has the program file and turn on the camera.
f...Adjustment will be done automatically. (There are no information on the LCD)
g...After completed the adjustment, the camera is turned off automatically.
<Description of TXT file>
When modify the program, use the Memo Pad of Windows and save it as "th73f_adj.txt".
Use only section related to each adjustment.
//----------adjustmnet----------//

starttotal

setreset
//adj_controlprogress_sig_start

//----------OB----------//

adj_controlcheck_process_id65535//
adj_controlprogress_sig_on
adj_controlsave_log_file