Samsung J7 - Smartphone Mobile Hotspot

20
Smartphone Mobile HotSpot
Turn your device into a Wi-Fi hotspot. The feature
works best when used in conjunction with 4G/LTE
™
data services.
Note: You must have a tethering plan on your
service in order to use the Mobile HotSpot.
To activate the Smartphone Mobile HotSpot
service for the first time:
1. From the Home screen, tap
Apps
g
Settings
g
Mobile HotSpot and
Tethering
g
Mobile HotSpot.
2. Tap On/Off to turn on Mobile HotSpot.
3. Edit the Network name field and then create
a new Network SSID name.
4. Enable the Broadcast network name (SSID)
field if you would like to broadcast your
SSID name to nearby devices.
5. Verify the Security field is set to WPA2 PSK.
6. Enter a new password then write it down.
7. Tap SAVE to store the new settings.
8. Confirm
Mobile HotSpot Active displays
in the Status bar.
Note: During the initial setup process,
the connection is not secure. It is
recommended that you maintain a secure
connection by using a password for
communication.
TMO J7 POSTPAID IBG.indd 20 4/20/2016 4:20:23 PM