37
Setting up the recording function using the camera buttons
E (Effect) button : Saturation
By using the camera’s digital processor, it is possible to add special effects
to your images
1. Press the E button and select
[Saturation](
) by pressing the Up/Down
button.
2. Change the Saturation value by pressing
the Left/Right button.
3. Press the OK button and the value will be
saved. Take a picture pressing the Shutter button.
E (Effect) button : Sharpness
You can adjust the sharpness of the picture
you are about to take. You cannot check the
sharpness effect on the LCD monitor before
you take a picture, because this function is
applied only when the captured image is
stored on the memory.
1. Press the E button and select
[Sharpness](
) by pressing the Up/Down button.
2. Change the Sharpness value by pressing the Left/Right button.
3. Press the OK button and the value will be saved. Take a picture
pressing the Shutter button.
E (Effect) button : Contrast
You can change the contrast of the image.
1. Press the E button and select [Contrast](
)
by pressing the Up/Down button.
2. Change the Contrast value by pressing the
Left/Right button.
3. Press the OK button and the value will be
saved. Take a picture pressing the Shutter
button.
Sharpness
Contrast
Move Set
Move Set
OK
Saturation
Move Set
To Next Page
Loading...
