Samsung L77 - Start up Image; Setup2; Quick View; Auto Power off

《46》
[ Quick view ]
■ If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
● Sub menus
[Off] : The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
[ Auto power off ]
■ This function switches the camera off after a set amount of time in order to
prevent unnecessary battery drainage.
● Sub menus
[1, 3, 5, 10 min] : The power will turn off
automatically if not used for the
period of time specified.
- After replacing the battery, the power off setting
will be preserved.
- Note that the automatic power off function will not
operate if the camera is in PC / Printer mode, slide show, playing back a voice
recording, playing back a movie clip and the interval shot.
Setup 2 ( )
Quick View
SETUP2
LCD Save
Video Out
Off
1 sec
3 sec
0.5 sec

Power Off



Format

Reset

Quick View
SETUP2
LCD Save
Video Out
3 min
1 min
10 min
5 min

Power Off



Format

Reset

Back Set
◀
OOKK
Back Set
◀
OOKK
[ Start up image ]
■ You can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
● Start up image : [Off], [LOGO], [User Image1],
[User Image2]
- Use a saved image for the start-up image with
the [User Image] in the [RESIZE] menu in the
play mode.
- The start-up image will not be deleted by
[DELETE] or [Format] menu.
- The User images will be deleted by [Reset]
menu.
File
SETUP1
Date&Time
Imprint

Language



LCD

Start Image

Back Set
◀
OOKK
OOffff
Setup 1 ( )

