<<
13
>>
Connecting to a Power Source
You can charge the rechargeable battery SLB-0937 by using the SAC-
46 KIT which consists of the AC adapter (SAC-46) and the USB cable
(SUC-C2). When the SAC-46 and SUC-C2 are combined, they can be
used as an AC cable.
Using an AC cable
: Connect the AC adapter(SAC-46) to the USB
cable. It can be used as a power cable.
Using a USB cable
: Remove the AC adapter (SAC-46).
You can download stored images to your PC
(p.98) or supply the power to your camera
through the USB cable.
Important information about USB cable usage.
Use a USB cable (SUC-C2) with the correct specification.
If the camera is connected to the PC through a USB hub :connect
the camera directly to the PC.
the camera and other devices are connected to the PC at the
same time : remove other device.
If the USB cable is connected to a port located on the front of the
PC : remove the cable and connect it to a port located on the back
of the PC.
If the USB port of the PC doesn't meet the Power output
standard(5V, 500mA), the camera may not be charged.
To Next Page
Loading...
