20
Removing the Stand
1 2
4
Hold the main body of the product with your hand as
shown in the ѣgure. Remove the assembled stand
from the main body in the direction of the arrow
as shown in the ѣgure.
Remove the two screws to separate the stand
from the screen.
RThe stand is removed. emove the stand neck from the stand base by
pulling it in the direction of the arrow as shown in
the ѣgure.
- Caution
Do not press down on the monitor. There is a risk
of damaging the monitor.
3
Removing the Stand
5
ࣖ
Before assembling the product, place the product down on a Ѥat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a Ѥat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
ࣖ
The exterior may differ depending on the product.
To Next Page
Loading...
