◀ ▶
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen❑Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Smart❑View1❑
for LCD 550 series and above
: Reduces original screen by 50%.
Smart❑View2❑
for LCD 550 series and above
: Reduces original screen by 25%.
NOTE
●
Smart❑View1 is enabled only in HDMI mode.
●
Smart❑View2 is enabled only in DTV and HDMI modes.
●
The picture size can vary depending on the input resolution when
content is played using Videos under My❑Downloads.
English
To Next Page
Loading...
