◀ ▶
●
Position: Adjust the picture position. It is only available in Screen❑Fit❑or❑Wide❑
Zoom.
●
Zoom/Position: Adjust the picture position. It is only available in Zoom.
NOTE
●
After selecting Screen❑Fit in HDMI (1080i / 1080p) or Component (1080i
/ 1080p) mode, you may need to centre the picture:
1. Press the
u
or
d
button to select Position.
2. Press the ENTER
E
button.
3. Press the
u
,
d
,
l
or
r
button to move the picture.
●
Depending on the input source, the picture size options may vary.
●
If you want to reset the position you adjusted, select Reset in the
Position screen. The picture will be set to its default position.
English
To Next Page
Loading...
