English-13
Plug and Play
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1 If the set is in standby mode, press the
POWER
button on the
remote control.
Result
: The message
Start Plug & Play.
is displayed. It
appears for a little while, and then the
Language
menu
is automatically displayed.
2 Select the appropriate
language
by pressing the or button.
The available languages are listed
.
You can choose one of 21 languages.
3 Press the
ENTER
button to confirm your choice.
Result
: The message
Check antenna input.
is displayed with
the
OK
selected.
4 Press the
ENTER
button.
Result
: The following areas are available:
Belgium - France - Germany - Italy -
Netherlands - Spain - Sweden - Switzerland -
United Kingdom - Eastern Europe- Others
5 Select your Country by pressing the or button.
Press the
ENTER
button.
Result
:
The
Auto Store
menu is displayed with the
Start selected.
6 Press the
ENTER
button.
Result
:
The channel search will start and end automatically.
7 Press the
ENTER
button.
Select the
hour
or
minute
by pressing the or button.
Set the
hour
or
minute
by pressing the or button.
(Refer to “
Setting and Displaying the Current Time” on page 40)
8 Press the
ENTER
button to confirm your setting.
Result
:
The
message
Enjoy your watching.
is displayed, and
then the channel which has been stored will be activated.
To Next Page
Loading...
