Samsung LE32M61B - Initializing the Image Settings

English-51
Initializing the Image Settings
You can replace all image settings with the factory default values.
Press the PC button under the remote’s cover to select the PC mode.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the or button to select Setup .
Press the
ENTER button.
Result
: The options available in the
Setup group are displayed.
3 Press the or button to select PC .
Press the
ENTER button.
Result
: The options available in the PC menu are displayed.
4 Press the or button to select Image Reset .
Press the
ENTER button.
Result
: You can initialize all image setting to the factory default
values.
5 Press the MENU button to return to the previous menu or press
the
EXIT button to return to normal viewing.
01 BN68-00956E-02Eng.qxd 11/30/05 12:19 AM Page 51