English-61
Installing the Wall Mount Kit
2 Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Remove the four screws from the back of the TV.
Separate the stand from the TV.
Cover the bottom hole with a cap
Loosen two screws on the rear side of the TV set (only model LE40M6 applied).
Attach the set-bracket onto the rear side of the TV set and secure the screws .
For 40 inches model, attach the bracket into the two holes with the two screws removed
in step 6 above.
3 Insert three Hangers of the set-bracket into the grooves of the wall-bracket .
Fix set-bracket and wall-bracket with screws .
Note: Before installing the set on the wall, connect the cables to the set first.
How to assemble the Wall Mount Bracket
(Only Model LE40M6 Applied)
To Next Page
Loading...
