Using the headset
17
Using call features
When the headset is connected to a mobile device, you can answer and control calls from the
connected mobile device.
Answering or declining a call
When a call comes in while you are wearing the headset, the indicator light will flash blue and
the headset will emit a sound while vibrating. Also a voice notification will inform you of the
incoming call’s phone number or the name saved in your contacts.
To answer the call, press the Talk button.
To decline the call, press and hold the Talk button.
•
When you play a multimedia file from one mobile device, you can still answer calls
from another mobile device, if both are connected to the headset. However, the
multimedia file will be paused and will resume after ending the call.
•
When two connected mobile devices are simultaneously receiving incoming calls,
you can answer the primary mobile device’s call with your headset first. You can also
take the other mobile device’s call by pressing the Talk button again. However, you
can speak on the call after ending the primary mobile device’s call.
•
You can set your headset to vibrate on the neckband (vibration area) when receiving
an incoming call. Press and hold the Volume (+, -) buttons simultaneously to turn the
vibration on or off.
Ending a call
Press the Talk button to end the current call.
To Next Page
Loading...
