Samsung Electronics
3. Preparation for Cabinet Installation
◈ Reference : Process of Screen check
26
화면 검사 사진 확인
Check the picture of the screen
◈ Internal white pattern
1. After turn on power, press the toggle switch button for five seconds
2. Dehumidification screen comes out, push the toggle switch twice
3. when the white screen is displayed, check the defective LED by sequentially pressing toggle switch
* Do not turn on the white pattern over 10 seconds before dehumidification
4. if you need more brighter pattern, push ‘toggle switch’ button for three(3) seconds in white pattern
5. push toggle switch for three(3) seconds again to exit factory OSD
POWER INLET
POWER OUTLET
SWITCH
TOGGLE SWITCH
TOGGLE SWITCH
To Next Page
Loading...
