Need help?Do you have a question about the Samsung LH015IAC Series and is the answer not in the manual?
Outlines critical precautions to prevent LED module damage during installation.
Details necessary pre-installation steps for cabinet packaging and space preparation.
Provides cautions and conditions for fixing screws based on wall types.
Instructs on installing the ASSY BRACKET P-FRAME onto the wall mount.
Guides installation of ASSY BRACKET P-FRONT with specific hanging instructions.
Provides additional installation guidance for ASSY BRACKET P-FRONT.
Details how to check the operation of each ASSY BRACKET P-FRONT installation.
Instructions for installing the left and right side bezels first.
Explains conditions requiring dehumidification to prevent short circuits.
Outlines manual and semi-auto methods for entering dehumidification mode.
Detailed steps for entering dehumidification mode via remote control hidden key.
Provides instructions for running dehumidification mode using LSM.
Specifies the default Auto IP settings for the IAC model.
Details the procedure to set IP addresses within factory mode.
Provides step-by-step instructions for screen disassembly.
Outlines the process for disassembling and replacing LED modules.
Provides instructions for reassembling LED modules correctly.
Guides on replacing the TCON board and updating its data.
Details the method for installing multiple IAB/IAC sets side-by-side.
Configuration steps for LED HDR settings in a multi-screen environment.
Guides on configuring screen settings using the LSM method for side-by-side setup.
Details the overall process for gradation calibration using SSA.
Step-by-step guide for connecting IAC devices via Wi-Fi Direct with SSA.
To Next Page
General