LED R&D Lab(VD)
116
IAB/IAC set 1
LEFT
IAB/IAC set 2
RIGHT
source
■ If one source equipment is connected and used, use a separate signal distribution equipment or wall controller
※ In order to optimize image sync, it is recommended to synchronize the output sync of the source equipment and
use the same fps.
(When changing the source equipment fps, the mute time may be different)
■ In order to use LED HDR function in side by side multi screen environment, 3.5 pi trio cable connection sold on the
market is required
※ LED HDR cable length is 130” minimum 3.5 M more required.
※ When booting the product, screen brightness synchronization between screens takes several seconds (within
about 20 seconds) and up to 4 screens can be connected.
■ Need to use the same BIN (same RANK) product to maintain the same luminance / color between IAC products
■ If calibration using SMC tool is required after multi screen installation, refer to installation manual 145 page guide
■ Option setting change between each screen needs to be carried out separately
[3.5 pi3 stereo cable]
Screen Settings for Side by Side Installation
□ Side by Side Configuration Notice
To Next Page
Loading...
