Samsung LH015IAC Series - Product disassembly method - 4) LED module replacement

LED R&D Lab(VD)
90
⑥-1 Separate the module
Back view
separte pin cable
DON`t separate FFC cable
Push the module by your finger
- While working, put on your gloves.
⑥-2 Separate the module
Front view
Separate FFC first, and disassemble module
Back view
⑥-3 Separate the module
Check the cable location of module you
want disassemble
Product disassembly method – 4) LED module replacement
□ Module disassemble
※ When pushing the module, support the module in front so that
there is no excessive tension between the module and the cable.
Avoid excessive tension