LED R&D Lab(VD)
14
▶ Connection structure: Connect the signal cable (OCM) and power cable between
P-FRAME and Front P-FRONT
1) P-FRAME Left/Right Connection
- Power unit on cable connection between AC Inlet Boards
- Connect the left/right cable of the speaker
2) Cable connection between P-FRAME + P-FRONT
- Connect four OCM cables to the Main Board Video output port
→ Form the OCM cable according to each P-FRONT location and connect it to the Lower Board
OCM connector at the bottom of the P-FRONT.
- Connect the SMPS output cable and the screen power input cable from the P-FRONT.
□ Features when configuring the Screen( Different specifications compared to the existing ones )
1. Product and installation information
To Next Page
Loading...
