LED R&D Lab(VD)
113
③-2 Connect the ASSY BRACKET P-FRAME to the BRACKET-FRAME SIDE LINK.
- Remove both BRACKET-SHAFT and GASKET-EMI from the connection area after BRACKET-LINK assembly (disposal)
- Assemble the T bar-shaped BRACKET-FRAME SIDE LINK on the connection (BH,M4,L8 screws)
Fig.1 Using leaflet for 2 set combining
Fig.2 Remove BRACKET-
SHAFTs and GASKET-EMI
Fig.3 Combine with BRKT-SIDE LINK
M4,L4 Screw points
146”
110”
Fig.4 Combine with BRKT-SIDE LINK section view
BRKT-FRAME SIDE LINK
BRACKET SHAFT
GASKET-EMI
Frame Installation and Side Link connection
To Next Page
Loading...
