Samsung Electronics
6. Disassembly & Front Service
Absorber
※ attachment location: about 5cm inside from corner of Half-Cabinet.
※ Absorber : Handle type tool that fixed on cabinet
front side(LED side) to prevent damage to LED
Modules while assembly/disassembly, moving half-
cabinets.
X
※ grasp as direction of push or pull.
★Caution★ Absorber must not be attached
across the Module line.
※ Handle should be locked in vertical.
Lock
Un-Lock
※ Location can be change according to the direction to move Half-cabinet
47
Move right Move left
Move up
Move down
To Next Page
Loading...
