Samsung LN-S4096D - Page 44

English-42
5
Press the ENTER button to return to “Mode”.
Press the or button to select “Color Tone”, then press the
ENTER button.
6
Press the or button to select a particular option (Cool2, Cool1, Normal,
Warm1, or Warm2), then press the ENTER button.
7
To return the factory defaults, select “Reset” by pressing the or button.
Press the ENTER button.
Press the or button to select “OK” or “Cancel”, then press the ENTER
button.
Select “Return” by pressing the or button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
• If you set “Reset” to “OK”, the previously adjusted settings will be
reset to the factory defaults.
The reset function must be set separately for each mode (Dynamic, Standard, Movie, or Custom).
Resetting the Picture Settings to the Factory Defaults