What to do if my Samsung LN-T2353H LCD TV has no picture or sound?
If your Samsung LCD TV has no picture or sound, try changing the channel. Also, press the SOURCE button and ensure the TV is plugged into a working outlet. Verify the antenna connections as well.
How to fix poor picture quality on Samsung LCD TV?
If you're experiencing a poor picture quality on your Samsung LCD TV, try switching to another channel. You can also try adjusting the antenna and checking all wire connections to ensure they are properly connected.
How to fix flickering horizontal bars on Samsung LN-T2353H LCD TV?
If horizontal bars appear to flicker, jitter, or shimmer on the image of your Samsung LCD TV, adjust the Coarse tuning and then adjust the Fine tuning.
How to fix flickering vertical bars on Samsung LN-T2353H?
If vertical bars appear to flicker, jitter, or shimmer on the image of your Samsung LCD TV, adjust the Coarse tuning and then adjust the Fine tuning.
Why is my Samsung LN-T2353H LCD TV remote control malfunctioning?
If the remote control for your Samsung LCD TV isn't working correctly, first replace the batteries. If that doesn't work, try cleaning the upper edge of the remote control (the transmission window) and check the battery terminals to make sure they are clean and properly aligned.
Why is there no sound on my Samsung LCD TV, or the sound is too low?
If your Samsung LCD TV has no sound or the sound is too low even at maximum volume, first check the volume of any devices connected to your TV, such as a digital broadcasting receiver, DVD player, cable broadcasting receiver, or VCR. Then, adjust the TV volume accordingly.
How to improve poor sound quality on Samsung LCD TV?
To address poor sound quality on your Samsung LCD TV, try changing to another channel or adjusting the antenna.
How to adjust brightness on Samsung LN-T2353H?
If the image on your Samsung LCD TV is too light or too dark, adjust the Brightness and Contrast settings. You may also need to adjust the Fine tuning.
What to do if my Samsung LN-T2353H LCD TV operates erratically?
If your Samsung LCD TV is operating erratically, unplug it for 30 seconds, and then try operating it again.
How to remove black bars on my Samsung LN-T2353H screen?
If you see black bars on the screen of your Samsung LCD TV, first ensure that the broadcast you’re watching is in High Definition (HD). If it is, set your cable/satellite box to stretch or widescreen mode to eliminate the bars.
General| Screen Size | 23 inches |
|---|---|
| Resolution | 1366 x 768 |
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Contrast Ratio | 3000:1 |
| Response Time | 8 ms |
| HDMI Ports | 2 |
| Component Video Inputs | 1 |
| Composite Video Inputs | 1 |
| HDTV Compatibility | 720p |
| Input Ports | HDMI, Component, Composite |
| Viewing Angle | 178 degrees |
Lists the TV's main features and technologies.
Lists all items included with the LCD TV.
Describes the basic TV controls located on the TV's panel.
Instructions for connecting VHF and UHF antennas to the TV.
Steps to connect cable TV without a cable box.
Connects to a cable box that descrambles all channels.
Guide for connecting a VCR using video cables.
Guide for connecting a VCR using S-Video cables.
Instructions for connecting a camcorder to the TV.
Instructions for connecting a DVD player or set-top box.
Connects a DVD player/Set-Top Box using HDMI input.
Connects DVD/Set-Top Box using DVI input.
Connects a digital audio system to the TV.
Connects the TV to a PC for use as a monitor.
Steps to power the TV on and off.
Describes the TV's automatic initial setup process.
How to change channels using the remote's CH buttons.
Adjusts the TV volume level up or down.
Displays current channel and audio/video settings.
Stores available channels for easy channel scanning.
Configures the remote to control a VCR.
Configures the remote to control a cable box.
Configures the remote to control a DVD player.
Configures the remote to control a Set-Top Box (STB).
Selects the TV's input source from connected devices.
Renames input sources for easier selection.
Selects preset picture modes like Dynamic, Standard, or Movie.
Adjusts the screen's color temperature for preference.
Restores all picture settings to factory defaults.
Adjusts the black level for screen depth.
Adjusts the middle brightness of pictures.
Selects color space for natural color tones.
Adjusts color settings to suit personal preferences.
Emphasizes object boundaries for clearer picture.
Automatically senses and processes film signals.
Adjusts screen depth by selecting black level.
Enables simultaneous viewing of two video sources.
Selects the desired channel for the PIP window.
Adjusts the position of the picture-in-picture window.
Adjusts the size of the picture-in-picture window.
Adjusts sound settings to personal preference.
Selects preset automatic sound settings.
Enables virtual surround sound through TV speakers.
Selects audio tracks for digital TV broadcasts.
Reduces volume differences among broadcasters.
Mutes the TV speakers.
Sets a melody to play when the TV is powered On or Off.
Resets all sound settings to factory defaults.
Connects headphones for private listening.
Selects the antenna input source (Air or Cable).
Removes scrambled channels from the digital cable list.
Displays lists of all, added, or favorite channels.
Assigns call letters to channels for identification.
Improves reception of weak signals.
Manually adjusts analog channels for optimal reception.
Uses the TV as a computer monitor.
Lists optimized screen modes for PC input.
Automatically adjusts TV settings for PC input.
Reduces picture noise and aligns the image.
Adjusts the horizontal and vertical position of the PC display.
Enhances picture quality for PC mode.
Manually sets the TV's clock time and date.
Sets the on-screen menu language.
Turns the blue screen on or off for poor signal conditions.
Controls the front panel LED on/off status.
Sets a 4-digit PIN for V-Chip restrictions.
Sets parental restrictions based on age categories.
View and listen to photos (JPEG) and audio (MP3) from USB.
Connects Samsung AV devices with Anynet+ feature.
Finds and switches between connected Anynet+ devices.
Instructions for removing the TV stand.
Compares performance of different video input types.
Compares performance of different audio output types.
Guide for connecting a VCR using video cables.
Guide for connecting a VCR using S-Video cables.
Instructions for connecting a camcorder to the TV.
Connects a digital audio system to the TV.
Connects the TV to a PC for use as a monitor.
Explains how to access and navigate the TV's on-screen menus.
Automatically stores available channels for scanning.
Selects preset picture modes like Dynamic, Standard, or Movie.
Adjusts picture settings like contrast, sharpness, and color.
Selects the TV's input source from connected devices.
Provides solutions for common TV problems.
To Next Page
