English - 4
Viewing the Connection Panel
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 7-11.
1
AV IN
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIDEO
Connect an S-Video signal from a camcorder or VCR.
2
DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
3
SERVICE / EX-LINK
Connector for service only.
4
HDMI/DVI IN / DVI IN (AUDIO R/L)
Connect to the HDMI jack of a device with an HDMI
output. Use the HDMI/DVI IN terminal for DVI connection
to an external device. You should use the DVI to HDMI
cable or DVI-HDMI adapter (DVI to HDMI) for video
connection, and the DVI IN ‘R-AUDIO-L’ terminal for
audio.
HDMI/DVI IN terminal does not support PC.
No sound connection is needed for an HDMI to HDMI
connection
5
HEADPHONE
Connects a set of external headphones for private
listening.
6
ANT 1 IN/ANT 2 IN
Connects to an antenna or cable TV system.
7
PC IN
Connects to the video and audio output jacks on
your PC.
8
COMPONENT IN
Connects Component video/audio.
9
POWER INPUT
Connects the supplied power cord.
0
KENSINGTON LOCK
The Kensington lock (not supplied) is a device used to
physically fix the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
The place of the Kensington Lock may be different
depending on its model.
To Next Page
Loading...
