11
English
02 Connections
Changing the Input source
Source List
O
MENU
m
→ Input → Source List → ENTER
E
Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.
■ TV / AV / Component / PC / HDMI/DVI
✎
You can only choose external
devices that are connected to the
TV. In the Source List, connected
inputs will be highlighted.
✎
PC always stay activated.
Edit Name
O
MENU
m
→ Input → Edit Name → ENTER
E
■ VCR / DVD / Cable STB / Satellite STB / PVR STB
/ AV Receiver / Game / Camcorder / PC / DVI PC /
DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the
device connected to the input jacks to make your input
source selection easier.
✎
When connecting a PC to the HDMI/DVI IN port with
HDMI cable, you should set the TV to PC mode under
Edit Name.
✎
When connecting a PC to the HDMI/DVI IN port with
HDMI to DVI cable, you should set the TV to DVI PC
mode under Edit Name.
✎
When connecting an AV devices to the HDMI/DVI IN
port with HDMI to DVI cable, you should set the TV to
DVI mode under Edit Name.
MEDIA.P
P
POWER
SLEEP
S.MODE
P.MODE
✎✎
NOTE
x
For HDMI/DVI cable connection, you must use the HDMI/DVI IN jack.
x
The interlace mode is not supported.
x
The set might operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
EX-LINK
Connector for service only.
Basic Features
[LD450-ZA]BN68-03317A.indb 11 2011-01-10 �� 12:37:27
To Next Page
Loading...
