What does 'Not Supported Mode' mean on Samsung LN32A300J1D?
If your Samsung LCD TV shows 'Not Supported Mode', check the maximum resolution and the connected device’s Video frequency. Compare these values with the data in the Display Modes.
Why is closed captioning not working on my Samsung LN32A300J1D LCD TV?
If Closed Captioning is not working on your Samsung LCD TV, and you are using a Cable/Satellite box, you must set Closed Captioning on the box, not your TV.
Why does my Samsung LN32A300J1D say 'Resets all settings'?
If the “Resets all settings to the default values” message appears on your Samsung LCD TV, this appears when you press and hold the EXIT button for a while.
Why is the picture distorted in the corner of my Samsung LN32A300J1D LCD TV?
If the picture appears distorted in the corner of the screen on your Samsung LCD TV, it may be because 'Just Scan' is selected with some external devices.
How to fix flickering vertical bars on Samsung LN32A300J1D LCD TV?
If you see vertical bars that appear to flicker, jitter, or shimmer on the image of your Samsung LCD TV, adjust the Coarse tuning and then adjust the Fine tuning.
How to fix flickering horizontal bars on Samsung LN32A300J1D?
If you see horizontal bars that appear to flicker, jitter, or shimmer on the image of your Samsung LCD TV, adjust the Coarse tuning and then adjust the Fine tuning.
How to center image on Samsung LN32A300J1D LCD TV screen?
If the image is not centered on the screen of your Samsung LCD TV, adjust the horizontal and vertical position. The screen position must be adjusted on the output source (i.e., STB) with a digital signal.
How to stabilize image on Samsung LN32A300J1D connected to PC?
If the image is not stable and may appear to vibrate when you have a computer connected to the PC input on your Samsung LCD TV, use your computer utility program to change the display settings if the setting is not correct.
What to do if my Samsung LCD TV operates erratically?
If your Samsung LCD TV operates erratically, unplug the TV for 30 seconds, then try operating it again.
What to do if my Samsung LN32A300J1D LCD TV has no picture or sound?
If your Samsung LCD TV shows no picture or sound, try the following: * Try another channel. * Press the SOURCE button. * Ensure the TV is properly plugged into a working outlet. * Check the antenna connections.
General| Screen Size | 32 inches |
|---|---|
| Resolution | 1366 x 768 |
| Display Type | LCD |
| HDMI Ports | 2 |
| Component Video Inputs | 1 |
| Composite Video Inputs | 1 |
| Power Consumption | 120W |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 3000:1 |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Input Ports | HDMI, Component, Composite, RF |
| HDTV Compatibility | 720p |
| Viewing Angle | 178° (Horizontal & Vertical) |
| Sound Output | 10W x 2 |
To Next Page