English - 29
When Double ( , ) mode has been set in PIP, the Picture Size cannot
be set.
Temporary image retention may occur when viewing a static image on the set
for more than two hours.
After selecting “Zoom” mode: Select by pressing the ◄ or ► button.
Use the ▲ or ▼ button to move the picture up and down. After selecting ,
use the ▲ or ▼ button to magnify or reduce the picture size in the vertical
direction.
“Wide Zoom”: Move the screen up/down using the ▲ or ▼ button after selecting
the by pressing the ► or ENTER button.
After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:
Select by pressing the ◄ or ►button. Press the ENTER button. Use the
▲, ▼, ◄ or ► button to move the picture. Press the ENTER button.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER
button. You can initialize the setting.
HD (High Definition)
16:9 - 1080i (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source Picture Size
TV, AV, S-Video,Component (480i,480p) 16:9, Wide Zoom, Zoom, 4:3
Component(1080i), HDMI (1080i) 16:9, Wide Zoom, Zoom, 4:3, Just Scan
PC 16:9, 4:3
Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
16:9
Sets the picture to 16:9 wide mode.
Wide Zoom
Magnify the size of the picture more
than 4:3.
Zoom
The screen size when Wide screen is
vertically enlarged.
4:3
Sets the picture to 4:3 normal mode.
Just Scan
Use the function to see the full
image without any cutoff when HDMI
(720p/1080i), Component (1080i)
signals are input.
➣
➣
➣
➣
➣
➣
➣
O
Move Enter Return
16:9
Wide Zoom
Zoom
4:3
Just Scan
SizeTV
Reset
▲
▲
▲
▲
Move Enter Return
16:9
Wide Zoom
Zoom
4:3
Just Scan
SizeTV
To Next Page
Loading...
