Samsung LN32A540P2D - Page 26

English - 24
Temporary image retention may occur when viewing a static image on the set
for more than two hours.
After selecting “Zoom1”, “Zoom2” or “Wide Fit”:
Press the ◄ or ► button to select “Position”, then press the ENTER
button. Press the ▲ or ▼ button to move the picture up and down.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER
button. You can initialize the setting.
After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:
Press the ▲ or ▼ button to select “H-Position” or “V-Position”, then press the
ENTER
button.
Press the ◄ or ► button to adjust the screen Position. Press the
ENTER button.
Reset: Press the ▲ or ▼ button to select “Reset”, then press the ENTER
button. You can initialize the setting.
HD (High Definition)
16:9 - 1080i (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
Input Source Picture Size
TV, Video, S-Video,
Component (480i, 480p)
16:9, Zoom1, Zoom2, 4:3
DTV(1080i), Component (1080i), HDMI
(720p, 1080i)
16:9, 4:3, Wide Fit, Just Scan
PC 16:9, 4:3
Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
16:9
Zoom1 U Move Zoom2 U Move
16:9
Sets the picture to 16:9 wide mode.
Zoom1
Magnifies the size of the picture on the
screen.
Zoom2
Magnifies the size of the picture more
than “Zoom1”.
Wide Fit U Move
4:3 Just Scan
Wide Fit
Enlarges the aspect ratio of the picture
to fit the entire screen.
4:3
Sets the picture to 4:3 normal mode.
Just Scan
Use the function to see the full
image without any cutoff when HDMI
(720p/1080i), Component (1080i) or
DTV (1080i) signals are input.
°
°
°
°
°
O
Adjust Enter Return
16 : 9
Zoom1
Zoom2
Wide Fit
4 : 3
Just Scan
SizeTV
Position Reset
Move Enter Return
16 : 9
Zoom1
Zoom2
Wide Fit
4 : 3
Just Scan ►
SizeTV
Move Enter Return
H-Position 0
V-Position 0
Reset
Just ScanTV
BN68-01392H-01Eng.indd 24 2008-04-14 ¿ÀÈÄ 1:20:11