Connecting
to
a
Cable
Box
that
Descrambles
Some
Channels
If your cable box descrambles only some channels (such
as
premium channels), follow the instructions below.
You
will need a two-
way splitter,
an
RF
(AlB) switch and four lengths of
RF
cable. (These items are available at most electronics stores.)
Incoming
cable
Cable
Box
1.
Find and disconnect the cable that
is
connected to the ANT
IN
terminal
on
your cable box.
rJ::1
This terminal might
be
labeled 'ANT IN', 'VHF IN' or simply, 'IN'
2.
Connect this cable
to
a two-way splitter
3.
Connect
an
RF
cable between the OUTPUT terminal
on
the splitter
and
the
IN
terminal
on
the cable box.
4.
Connect
an
RF
cable between the ANT OUT terminal
on
the cable box and the
B-IN
terminal
on
the RF(AlB) switch.
5.
Connect another cable between the other OUT terminal
on
the splitter and the
A-IN
terminal
on
the
RF
(AlB) switch.
6.
Connect the last
RF
cable between the OUT terminal
on
the
RF
(AlB) switch
and
the ANT
IN
terminal
on
the rear of the
TV
After
you
have made this connection, set the AlB switch
to
the
'A'
position for normal viewing. Set the AlB switch
to
the '8'
position
to
view scrambled channels. (When you set the AlB switch to 'B', you will need
to
tune your TV to the cable box's
output channel, which
is
usually channel 3 or 4.)
•
Connecting
a
OVD
I
Blu-ray
player
I
Cable
Box
I
Satellite
receiver
(Set-Top
Box)
via
HOMI
This connection can only
be
made if there
is
an
HOMI
Output connector
on
the external device.
TV Rear Panel
DVD
I
Blu-ray
player I Cable
Box
I
Satellite receiver (Set-Top
Box)
,I
I:
'1
/
~i
l 0 HDMI Cable (Not
supplied)
r-
or
-:
'--
------------------
.
1.
Connect
an
HOMI
Cable between the
HDMIIN
(1, 2 or
3)
jack
on
the TV and the HOMI jack
on
the
OVO
I Blu-ray Player or
Cable Box
I Satellite receiver (Set-Top Box).
[-'J
What
is
HOMI?
• HOMI(High-Oefinition Multimedia Interface),
is
an
interface that enables the transmission of digital audio and video signals
using a single cable.
• The difference between HOMI and
OVI
is
that the HOMI device
is
smaller
in
size and has the HOCP (High Bandwidth Digital
Copy Protection) coding feature installed.
l0 Each
OVO
I Blu-ray player I Cable Box I Satellite receiver (Set-Top Box) has a different back panel configuration
r~
The TV may not output sound and pictures may
be
displayed with abnormal color when
OVO
I Blu-ray player I Cable Box I
Satellite receiver (Set-Top Box) supporting HOMI versions older than 1.3 are connected. When connecting
an
older
HOMI
cable and there
is
no
sound, connect the HOMI cable to the
HDMIIN
1 (DVI) jack and the audio cables to the DVI AUDIO
IN
[R-AUDIO-LJ jacks
on
the back of the
TV
If this happens, contact the company that provided the
OVO
I Blu-ray player I
Cable Box I Satellite receiver (Set-Top Box) to confirm the HOMI version, then request
an
upgrade.
!EJ
HOMI cables that are not 1.3 may cause annoying flicker or
no
screen display.
To Next Page
Loading...
