Samsung LN32B530 - Remote Control; Remote Control Buttons and Functions

•
Remote Control
~
You can use the remote control up to a distance of about 23 feet from the TV.
~
The performance of the remote control may be affected by bright light.
(lJ
The product color and shape may vary depending on the model.
POWER
TV
@]
0
POWER: Turns the TV on and
E)
TV: Selects the TV mode directly.
OJITJCD
off
'9
PRE-CH Enables you to return
f.)
NUMERIC BUTTONS Press to
to the previous channel you were
[DCDG]
change the channel.
watching.
e
0: Press to select additional
@
VCHA:
Press to change
000
channels (digital) being
channels.
broadcast by the same station
(@
SOURCE: Press to display
808
For example, to select channel
and select the available video
'54-3', press '54', then press G
sources.
[j .~' [
and '3'
~
FAV.CH: Press to switch to your
+ @ A
0
MUTE 4:: Press to temporarily
VOL SOURCE CH
favorite channels
- [€l] v
cut off the sound.
m
0
MENU: Displays the main on-
+ VOL -: Press to increase or
screen menu.
[CH LIST] [M~U] [FAVC"]
decrease the volume
m
RETURN: Returns to the
0
CH LIST: Used to display
previous menu.
~ ~
Channel Lists on the screen.
W UP ./DOWNT ILEFT.I
"c(j~c,..p1-
G
TOOLS: Use to quickly select
RIGHT~/ENTER[3ll Use to
8~8
frequently used functions.
select on-screen menu items and
0
INFO Press to display
change menu values.
information on the TV screen.
~
EXIT: Press to exit the menu.
~~
0
COLOR BUTTONS Use these
~
P.SIZE: Picture size selection.
I 0 ~.~
buttons in the Channel list menus
~
SRS: Selects SRS TruSurround
etc.
( •• 0.)
HD mode.
'1!) S.MODE Press to select the
~
CC: Controls the caption
(e)
sound mode.
[S.MOD~
SRS
decoder.
G)
P.MODE: Press to select the
G;
MTS: Press to choose stereo,
~~
picture mode.
mono or Separate Audio
@
Use these buttons in the DMA
Program (SAP broadcast).
and Anynet+ modes. (0: This
remote can be used to control
recording on Samsung recorders
with the Anynet+ feature)
SftMSUNG
• Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
~ Make sure to match the '+' and '-' ends of the batteries with the diagram inside the
compartment.
3. Replace the cover.
~ Remove the batteries and store them in a cool, dry place if you won't be using the
remote control for a long time (Assuming typical TV usage, the batteries should last for about one year.)
~ If the remote control doesn't work, check the following:
• Is the TV power on?
• Are the plus and minus ends of the batteries reversed?
• Are the batteries drained?
• Is there a power outage or is the power cord unplugged?
• Is there a special fluorescent light or neon sign nearby?