Connecting
to
a
Cable
Box
that
Descrambles
Some
Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below.
You
will need a two-
way splitter,
an
RF
(AlB) switch and four lengths of
RF
cable. (These items are available
at
most electronics stores.)
ANT
IN
.........
.
~~@
TV
Rear
Cable
Box
1. Find and disconnect the cable that
is
connected to the ANT
IN
terminal
on
your cable box.
l0 This terminal miflht
be
labeled 'ANT IN', 'VHF IN' or simply, 'IN'.
2.
Connect this cable to a two-way splitter.
3.
Connect an
RF
cable between the OUTPUT terminal on the splitter and the
IN
terminal
on
the cable box.
4.
Connect an
RF
cable between the ANT OUT terminal on the cable box and the
B-IN
terminal
on
the RF(AlB) switch.
5.
Connect another cable between the other OUT terminal on the splitter and the
A-IN
terminal
on
the
RF
(AlB) switch.
6.
Connect the last
RF
cable between the OUT terminal
on
the
RF
(AlB) switch and the
ANT
IN
terminal
on
the rear of the
TV.
After you have made this connection, set the AlB switch to the 'A' position for normal viewing. Set the AlB switch to the 'B'
position to view scrambled channels. (When you set the AlB switch to 'B', you will need to tune your TV to the cable box's
output channel, which
is
usually channel 3 or 4.)
•
Connecting
a
OVO
I
Blu-ray
player
I
Cable
Box
I
Satellite
receiver
(Set-Top
Box)
via
HOMI
This connection can only be made if there
is
an
HDMI Output connector
on
the external device.
TV Side Panel
-
@
,l;lJ:<
C!j
•
'I,~f
••
I
r
TV Rear Panel
...............................
..
-
1------
or
------
l •
1 0 HOMI Cable
(Not
supplied)
OVO
I
Blu-ray
player
I Cable
Box
I
Satellite
receiver
(Set-Top
Box)
1. Connect
an
HDMI Cable between the
HOMIIN
(1,2
or 3) jack
on
the TV and the HOMI jack
on
the DVD I Blu-ray Player or
Cable Box
I Satellite receiver (Set-Top Box).
l0
What
is
HDMI?
• HDMI(High-Definition Multimedia Interface), is
an
interface that enables the transmission of digital audio and video signals
using a single cable
• The difference between HDMI and
OVI
is
that the HDMI device
is
smaller in size and has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed.
l0
Each DVD I Blu-ray player I Cable Box I Satellite receiver (Set-Top Box) has a different back panel configuration.
l0
The TV may not output sound and pictures may be displayed with abnormal color when OVD I Blu-ray player I Cable Box I
Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting
an
older HDMI
cable and there
is
no sound, connect the HDMI cable to the
HOMIIN
1 jack and the audio cables to the
OVIIN
(HOMI1)
[R-AUOIO-L] jacks on the back of the
TV.
If this happens, contact the company that provided the DVD I Blu-ray player I
Cable Box I Sate!lite receiver (Set-Top Box) to confirm the HDMI version, then request
an
upgrade.
l0
HOMI cables that are not
1.3
may cause annoying flicker or
no
screen display.
;ll:1ft.J~~L~~~i
~;~~~t!~~~~~
~(.,;;f~,>
••
~,,~
\
~~
~~~¢t;;
To Next Page
Loading...
