II
5k"
II#!
Menu
tarlguage
Sto<e
Demo,
Chennels,
and
limll
\\OU
Start
jill
When the TV
is
initially powered
on,
basic settings proceed automatically and subsequently.
1.
Press the POWER
C)
button
on
the remote control.
IZJ
You
can also use the POWER
C)
button
on
the
TV
IZJ
The message Menu Language, Store Demo, Channels, and Time
will
be set.
is
displayed.
2.
Press the ENTER QlI button, then Sets the
menu
language. menu
is
automatically displayed.
3.
Press the £ or T button
to
select the language, then press the ENTER QlI button. The message Select 'Home Use' when
installing
this
TV in
your
home.
is
displayed.
4.
Press the
....
or
~
button to select Store Demo or Home Use, then press the ENTER QlI button. The message Select the
Antenna
source
to
memorize.
is
displayed.
121
We
recommend setting the TV to Home Use mode for the best picture
in
your horne environment
Store Demo mode
is
only intended for use
in
retail environments. If the unit
is
accidentally set to Store Demo mode
and
you
want
to
return
to
Home Use (Standard): Press the volume button
on
the
TV
When the volume OSD
is
displayed,
press
and
hold the MENU button
on
the TV for 5 seconds.
5.
Press the £ or T button to memorize the channels of the selected connection. Press the ENTER QlI button
to
select
Start
I2J
Air:
Air
antenna signal. I Cable: Cable antenna signal. I
Auto:
Air
and Cable antenna signals.
iEJ
In
Cable mode, you can select the correct signal source among STD, HRC, and IRC
by
pressing the
£,
T,
....
or
~
button, then press the ENTER QlI button If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company
to
identify the type of cable system that exists
in
your particular area.
6.
Press the ENTER QlI button to select
Start
The TV will begin memorizing
all
of the available channels
[I,']
To
stop the search before
it
has finished, press the ENTER QlI button with
Stop
selected.
IZJ
After all the available channels are stored,
it
starts to remove scrambled channels. The Auto program menu then
reappears. Press the ENTER QlI button when channel memorization
is
complete. The message Set the
Clock
Mode.
is
displayed
7.
Press the ENTER G button.
Press the
£ or T button to select Auto, then Press the ENTER QlI button. The message Set
to
daylight
saving
time.
is
displayed. If you select Manual, Set
current
date and
time
is
displayed.
8.
Press the £ or T button
to
select Off, On or Auto, then press the ENTER QlI button.
9.
Press the £ or T button
to
highlight the time zone for your local area. Press the ENTER
QlI
button. If you have received a
digital signal, the time will be set automatically. If not, see page
30
to
set the clock.
10. The connection method to provide the best quality
HD
is
offered After confirming the method, press the ENTER QlI button.
11.
The message
Enjoy
your
watching.
is
displayed. When you have finished, press the
ENTERQlI
button.
If
you
want
to
reset
this
feature...
1.
Press the MENU button
to
display the menu. Press the £ or T button to select Setup, then press the ENTER QlI button.
2.
Press the ENTER QlI button again to select Plug & Play.
iPI
The Plug & Play feature
is
only available
in
the TV mode.
To Next Page
Loading...
