lEI
Temporary image retention may occur when viewing a static image
on
the set for more than two hours.
lEI
After selecting
Zoom'l,
Zoom2
or
Wide
Fit: Press the
~
or
~
button to select Position, then press the ENTER G button.
Press the A or
...
button to move the picture up and down.
lEI
After selecting Screen
Fit
in
HDMI (1080i/1080p) or Component (1080i/1080p) mode, you made need to center the picture:
Press the
~
or
~
button
to
select
Position,
then press the ENTER G button. Press the A,
"',
~
or
~
button to move the
picture.
Reset: Press the
~
or
~
button
to
select Reset, then press the ENTER G button.
You
can initialize the setting.
lEI
HD (High Definition)
169
- 1080i/1080p (1920x1080), 720p (1280x720)
lEI
Settings can be adjusted and stored for each external device you have connected to
an
input of the
TV
Input Source
TV,
AV,
Component (480i, 480p)
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080P)
PC
Picture Size
16:9,
Zoom1, Zoom2,
4:3
16:9,4:3,
Wide
Fit, Screen
Fit
16:9,4:3
Digital
NR --.
Off
1
Low!
Medium!
High!
Auto
If the broadcast signal received
by
your TV
is
weak, you can activate the Digital Noise Reduction feature
to
help reduce any static
and ghosting that may appear
on
the screen.
rEI
When the signal
is
weak, select one of the other options until the best picture
is
displayed.
HOMI
Black
Level --.
Normal!
Low
You
can select the black level
on
the screen to adjust the screen depth.
lEI
This function is active only when the external input connected to HDMI (RGB signals). "HDMI Black Level" function may not be
compatible with
all
external devices.
Film
Mode
--.
Off!
Auto
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
lEI
Film
Mode
is
supported
in
TV,
Video, Component (480i 11080i) and HDMI (480i 11080i).
o Picture Reset
->
ResElt
Picture Mode I Cancel
Resets all picture settings to the default values.
lEI
Reset
Picture
Mode: Current picture values returr. to default settings.
I Using Your
TV
as a Computer (PC) Display
Setting
Up
Your
PC
Softwam
(Based
on
Windows
XPj
The Windows display-settings for a typical computer are shown below. The actual screens
on
your
PC
will probably be different,
depending upon your particular version of Windows and your particular video card. However, even if your actual screens look
different, the same basic set-up information will apply
in
almost all cases. (If not, contact your computer manufacturer or Samsung
Dealer.)
1. First, click
on
'Control Panel'
in
the Windows start menu.
2.
When the control panel window appears, click
on
'Appearance and Themes' and a display dialog-box will appear.
3.
When the control panel window appears, click
on
'Display' and a display dialog-box will appear.
4.
Navigate to the 'Settings' tab
on
the display dialog-box.
The correct size setting (resolution): Optimum: 1920 X 1080 pixels
If a vertical frequency option exists
on
your display settings dialog box, the correct value
is
60 or 60 Hz. Otherwise, just click
OK
and exit the dialog box.
To Next Page
Loading...
