• Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall.
In
particular, ensure your children do not
hang over or destabilize the
TV;
doing so may cause the
TV
to tip over, causing serious injuries or death. Follow
all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety
purposes, as follows.
------_.
l0 Depends
on
Models.
Components:
TV-Holder
I~
{/
Screw 0 (M4X 16)
To
prevent
the
TV
from
falling:
1. Attach the TV-Holder
to
the TV by fastening the screws 0 (M4X 16) into the holes
in
the center of the
TV.
l0 Make sure
to
only use the supplied screws.
/
[I
\
J
2.
Firmly fasten the screws
to
the wall or cabinet where the TV is
to
be
installed. Tie the TV-Holder attached
to
the TV and the
screws fastened on the wall or cabinet so that the TV is fixed.
® Purchase the screws
to
be used on the wall or cabinet separately.
l0 Install the TV close
to
the wall so that it does not fall.
l0 When attaching the TV
to
the wall, tie the cord level with the ground or slanted downwards for safety purposes.
l0 Confirm that the cord or link does not come loose frequently.
l0 Before moving the
TV,
separate the connected cord first.
.........•••••
:
...
:
•.
:
•................
.........
~i
"------,
\.......
.'
/
............
..
'
/········1··
..
···········\
:
:>,
" , :
. .
~:==:IJt::;::~..........
.,,:
IT_~······
....
·······
..
············
3.
Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure If you have any
doubt about the security of your connections, contact a professional installer.
To Next Page
Loading...
