Samsung LN32B530 - Page 73

Assemble Stand before
removing
LCD TV from
shOpping box
Installing the LCD TV Stand
~ Components
L When installing the stand, use the provided components and parts.
Stand
1EA
Cover Neck Guide Stand
@ Screws: 3 EA @ Screws: 4 EA
(Label white) (Label yellow)
Screws
:0 Connect the guide stand and Cover Neck onto
I the stand using the @ screws, as shown in the
figure. (Applicable to models 32 inch only.)
e Connect your LCD TV and the stand.
~~ront
Ba~
Back
e Fasten two @ screws at position CD and then
fasten two @ screws at position (2) .
.. ()
Position ~ .<-:().()
/\\,-;:;::7// _ /~. .G
/-:;. '\ ... / ./
................ .......... rfI"...-
Position <D
Caution ~
Make sure to distinguish between the front and back of each component when
assembling them.
>- Make sure that at least two persons lift and move the LCD TV.
Stand the product up and fasten the screws.
If you fasten the screws with the LCD TV placed down, it may lean to one side.