Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not
hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow
all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety
purposes, as follows.
Components (depend on model):
To prevent the TV from falling:
1. Attach the TV-Holder to the TV by fastening the screws
1
(M4X 16) into the holes in the center of the TV.
Make sure to only use the supplied screws.
2. Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the
screws fastened on the wall or cabinet so that the TV is xed.
Purchase the screws to be used on the wall or cabinet separately.
Install the TV close to the wall so that it does not fall.
When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
Con rm that the cord or link does not come loose frequently.
Before moving the TV, separate the connected cord rst.
3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any
doubt about the security of your connections, contact a professional installer.
¦
N
N
N
N
N
N
TV-Holder
Screw
1
(M4X 16)
To Next Page
Loading...
