Samsung LN40D550 - Plug & Play (Initial Setup)

English - 5
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎ Connecting the power cord and antenna.
Cable
R-AUDIO-L
P
R PB Y
ANT OUT
VHF/UHF Antenna
Power Input
or
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER P button. Plug & Play is available only when the Source is set to TV.
✎ To return to the previous step, press the red button.
1
Selecting Language of
the OSD
Press the ▲ or ▼ button, then press the ENTER E button. Select the
desired OSD (On Screen Display) language.
P
POWER
FAV.CH
CHLIST
MEDIA.P
P.MODE
S.MODE
P.SIZE
CC
MTS
INFO
SLEEP
2
Selecting the usage
mode
Press the ◄ or ► button, then press the ENTER E button.
y Select the Home Use mode. Store Demo Mode is for retail environments.
y To return the unit’s settings from Store Demo to Home Use (standard):
Press the volume button on the TV. When you see the volume in the OSD,
press and hold MENU for 5 sec.
3
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
✎ If you select the Auto, select the time zone where you live.
4
Selecting search
options for auto tuning
Press the ▲ or ▼ button, then press the ENTER E button. Select Air or Cable.
5
Selecting a channel The channel search will start automatically.
For more information, refer to Channel → Auto Program.
✎ Press the ENTER E button at any time to interrupt the memorization process.
6
Enjoy your TV.
Select the Watch TV. Press the ENTER E button.
✎ If you select the Networking Settings, set the network.
If You Want to Reset This Feature...
O MENU m → System → Plug & Play → ENTER E
[LD550-ZD]BN68-03376A-Eng.indb 5 2011-02-21 �� 10:47:23