◀ ▶
English
Problem Possible Solution
Anynet+ does not
work.
•
Check whether the TV remote control is in TV mode.
•
Check whether the remote control is Anynet+ compatible.
•
Anynet+ does not work in certain situations. (Searching
channels, operating My❑Contents or Plug❑&❑Play (initial setup),
etc.)
•
When connecting or removing the HDMI cable, please make
sure to search devices again or turn your TV off and on again.
•
Check if the Anynet+ Function of Anynet+ device is set on.
To Next Page
Loading...
