Samsung LN40D630M3FXZA - Anynet+ and AllShare Features

What is Anynet+?
Anynet+ is afunction that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
W's remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
TV
HDMI Cable
HDMI Cable
Optical
Cable
HomeTheater
o]
Anynet+
Device1
HDMICable_
HDMI Cable
Anynet+
Device2, 3, 4
1. Connect the HDMI _N(1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device
using an HDMI cable.
2. Connect the HDMI INjack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
NOTE
° Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theater.
• When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theater's Front Left and Right speakers and the subwoofer. Ifyou want to hear 5.1 channel audio, connect
the D_GITAL AUDIO OUT (OPTICAL} jack on the DVD/ Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theater, not the TV.
• Only one Home Theater can be connected.
• You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
• Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
• Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English 37