Samsung LN40D630M3FXZA - Plug & Play (Initial Setup)

WhentheTVisinitiallypoweredon,basicsettingsproceedautomatically.
Connectingthemainsandantenna.
....... VHF/UHFAntenna ........"
[
or
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERLb button. Plug & Play is available only when the input source is set to TV.
To return to the previous step, press the red button.
Selecting a tanguage
Selecting Store Demo
or Home Use
Selecting an amenna
Selecting a channel
Setting the Clock
Mode
VJewtngthe HD
Connection Guide
Press tne A or 1!' button, then press the ENTERC_ button. POWER
Select tne destreq OSD (On Screen Display)language,
Press tne _ or I_ button, then press the ENTERE_ button.
• Select the Home Use mode. Store Demo Mode is for retail
environments,
- To return the unit's settings from Store Demo to Home Use
stanoaro): Press the volume button on the TV. When you see the
otume tnthe OSD, press and hold MENU for 5 sec.
Press tne A or T button, then press the ENTERI_ button. Select Air, Cable or Auto.
_ - Cable mode, you can select the correct signal source among STD, HRC, and IRC
Dy presstng the A, T, _1 or !_ button, then press the ENTERI_ button.
The cnannet search s start automatically.
For more nformation, refer to Channel-_ Auto Program, (R 12)
Press the ENTERI_ button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
_ " ou ;elect the Auto, set the daylight saving time.
Select the time zone which you live.
The connecuon method for the best HD screen quality is displayed.
Enjoy your TV.
Press the ENTERI_ button.
If You Want to Reset This Feature...
[_ MENUiTrl --_ Setup _ Plug & Play _ ENTERI_
English 7