Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, Home Theater
DIGITAL AUDIO OUT (OPTICAL)
• When a Digital Audio System is connected to the D_G_TALAUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
• 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
• When the receiver (home theater) is set to on, you can hear sound output from the TV's optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to
: hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
: receiver directly to an amplifier or home theater.
AUDIO OUT: Connects to the audio input jacks on your amplifier/home theater.
: • When connecting, use the appropriate connector (sold separately).
• When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier's volume control.
Using an HDMI/DVl Cable / a D-sub Cable
.....,,,,%
English 9
To Next Page
Loading...
