10 Operating Instructions and Installation
10-2
10-2 Connection Panel
1. AV IN 1
Video and audio inputs for external devices, such as
a camcorder or VCR.
S-VIDEO 1
Connect an S-Video signal from a camcorder or VCR.
2. AUDIO OUT
Connect to the audio input jacks on your Amplifier/
Home theater.
3. DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio component.
4. SERVICE 1/SERVICE 2
Connector for service only.
5. HDMI/DVI IN 1/2, DVI IN
Connect to the HDMI jack of a device with an HDMI
output.
Use the HDMI/DVI terminal for DVI connection to an
external device. You should use the DVI to HDMI
cable or DVI-HDMI adapter (DVI to HDMI) for the
connection, and the DVI IN 'R -AUDIO -L' terminal
for audio.
- HDMI/DVI IN terminal does not support PC.
- No sound connection is needed for an HDMI to
HDMI connection.
6. HEADPHONE (LN-S2641D)
Connect a set of external headphones for private lis
tening.
7. ANT 1 IN/ANT 2 IN
Connect to an antenna or to a cable TV system.
8. PC IN
Connect to the video and audio output jacks on your
PC.
9. COMPONENT IN
Connect component video/audio.
10. POWER INPUT
Connect the supplied power cord.
11. KENSINGTON LOCK
The Kensington lock (optional) is a device used to
physically fix the system when used in a public
place.
If you want to use a locking device, contact the deal
er where you purchased the TV.
The place of the Kensington Lock may be different
depending on its model.
LN-S2641D
LN-S3241D / LN-S4041D
To Next Page
Loading...
