Why Samsung M1714 output is low? Oven takes longer time to cook food.
If your Samsung Microwave Oven takes longer to cook food, it could be due to: * A decrease in the power source voltage. * A loose wiring of the magnetron filament circuit, leading to intermittent oscillation. * The aging of the magnetron. Consult an electrician to check the power source.
What to do if my Samsung Microwave Oven does not accept key input (Program)?
If your Samsung Microwave Oven isn't responding to key inputs, the problem could stem from: * Key input not being in the correct sequence. * A loose connection between the membrane keypad and the Ass'y PCB. * A shorted or open membrane panel. * A defective Ass'y PCB. Refer to the operation procedure. Replace the PCB main.
How to fix uneven cooking in Samsung M1714?
Uneven cooking in your Samsung Microwave Oven may be due to the inherent characteristics of microwave intensity. To mitigate this: * Wrap thinner parts of the food with aluminum foil. * Use plastic wrap or cover with a lid. * Stir foods like soup, cocoa, or milk once or twice during cooking.
Why Samsung M1714 Microwave Oven turntable motor does not rotate?
If the turntable motor in your Samsung Microwave Oven isn't rotating, it could be due to: * Open or loose wiring of the turntable motor. * A defective turntable motor. Replace the turntable motor.
What to do if my Samsung M1714 timer starts countdown but no microwave oscillation?
If the timer counts down but there's no heat, while the oven lamp and fan motor are on, the issue could be due to several reasons: * Misaligned latch switches. * A loose connection in the high voltage circuit, particularly the magnetron filament circuit. High contact resistance can lower magnetron filament voltage, causing reduced output or intermittent oscillation. * Defective high voltage components like the H.V. Transformer, H.V. Capacitor, H.V. Diode, H.V. Fuse, or Magnetron. * Loose wiring of the power relay. * A defective primary latch switch. * A defective power relay or Ass'y PCB. Adjust the door and latch switches. Check the high voltage components and replace any defective parts. Consider replacing the PCB main.
What causes sparks in my Samsung Microwave Oven?
Sparks inside your Samsung Microwave Oven are usually caused by: * Metallic ware or cooking dishes touching the oven wall. * Ceramic ware trimmed with gold or silver powder. Avoid using any cookware with metallic trimming.
Why my Samsung M1714 stops operation during cooking?
If your Samsung Microwave Oven stops during cooking, it could be due to: * Open or loose wiring of the primary interlock switch. * Activation of the thermal cutout (Magnetron). Adjust the door and latch switches.
What to do if my Samsung M1714 has no display and no operation at all, and the fuse is blown?
If your Samsung Microwave Oven has no display, doesn't operate, and the fuse is blown, the cause might be: * A shorted lead wire harness. * A defective primary latch switch. * A defective monitor switch. * A shorted HV Capacitor. * A shorted HV Transformer. Check the adjustment of the primary, interlock monitor, and door sensing switches.
What to do if my Samsung M1714 is dead, fuse is OK, with no display and no operation at all?
If your Samsung Microwave Oven is completely dead (no display, no operation) but the fuse is okay, the possible causes include: * An open or loose lead wire harness. * An open thermal cutout (Magnetron). * An open low voltage transformer. * A defective Ass'y PCB. Check the fan motor if the thermal cutout is defective. Check the Ass'y PCB if the LVT is defective.
Why Samsung M1714 can program but timer does not start?
If your Samsung Microwave Oven can be programmed, but the timer doesn't start, the issue might be: * Open or loose wiring of the secondary interlock switch. * Misalignment of the primary interlock. * A defective secondary interlock switch. Adjust the door and interlock switches.
General| Brand | Samsung |
|---|---|
| Model | M1714 |
| Category | Microwave Oven |
| Language | English |
To Next Page
