- 29 -
Read before connecting an Anynet+ (HDMI-CEC) device
" -enabled devices must be connected to the TV with an HDMI cable. Note that some HDMI cables may
not support .
" Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
" The TV remote control may not work under certain circumstances. If this occurs, set up the device as an
-enabled device again.
" works only with external devices that support HDMI-CEC and only when those devices are either in
standby mode or turned on.
"
can control only one home theater system.
" To listen to 5.1 channel audio from an external device, connect the device to the TV via an HDMI cable and connect a 5.1
home theater system directly to the external device's digital audio output connector.
Controlling the TV with a Keyboard or Mouse
Connecting a keyboard or mouse to make it easier to control the TV.
Settings General External Device Manager Input Device Manager Try Now
You can connect a keyboard or mouse to make it easier to control the TV.
Connecting a USB keyboard or mouse
Plug the keyboard or mouse cable into the USB port.
" If you connect a mouse, it is available only in the Internet app.
To Next Page
Loading...
