30
Setting an address and installation option of Universal Comm. Kit
Set the address of an Universal Comm. Kit and installation option with remote controller options. Set each
same time. You need to set twice when setting the address of an Universal Comm. Kit and installation option.
The procedure of option setting
High Temp Button
High Fan Button
Mode change
Low Temp Button
Low Fan Button
Entering mode for
option setting
Option setting mode
Step 1. Entering mode for option setting
1. Remove batteries from the remote controller.
2.
3. Check if you have entered the option setting status.
Step 2. The procedure of option setting
•
•
•
X X X X X X X X X X
X X X X X X X X X X
CAUTION
DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 30DB68-06643A-03_IM_ACC UCK Kit_AA_EN.indd 30 2023-01-13 오전 11:35:142023-01-13 오전 11:35:14
To Next Page
Loading...
