To Next PageTo Next Page
Need help?Do you have a question about the Samsung MH035FAEA and is the answer not in the manual?
General| Indoor unit type | Wall-mountable |
|---|---|
| Indoor unit weight | 9000 g |
| Indoor unit dimensions (WxDxH) | 820 x 190 x 286 mm |
| Type | Air conditioner indoor unit |
| Remotely operated | Yes |
| Cooling capacity (max) | - BTU/h |
| Air conditioner functions | cooling, heating |
| Cooling capacity in watts (max) | 3500 W |
| Heating capacity in watts (max) | 3800 W |
| Power requirements | 220 - 240 V, 50Hz |
| Power consumption (cooling) (max) | - W |
Guidelines for safe and proper installation of the air conditioner unit.
Instructions for connecting the air conditioner to the power supply and circuit breaker.
Safety precautions and guidelines for operating the air conditioner.
Proper procedures for disposing of the air conditioner unit and its components.
General guidelines and safety measures for handling and operating the unit.
Detailed features and characteristics of the multi-inverter air conditioner series.
Technical specifications for various indoor and outdoor unit models.
Comparison of specifications between different development and comparative models.
List of accessories and optional parts available for indoor units.
Essential tools required for disassembly and reassembly procedures.
Step-by-step guide for disassembling the outdoor unit for service.
Troubleshooting guide for indoor unit display errors and check methods.
Procedure for setting up various options using the remote control.
Initial checks and common troubleshooting steps for non-malfunctioning issues.
Procedures for checking and testing the air conditioner after installation.
Diagnosing faults based on symptoms for indoor and outdoor units.
Guidelines and cautions for inspecting and replacing Printed Circuit Board (PCB).
Exploded views and parts list for various indoor unit models.
Exploded views and parts list for various outdoor unit models.
Exploded views and parts list for the Assy Control Out assembly.
Detailed diagrams of indoor unit PCBs with connector and component identification.
Detailed diagrams of outdoor unit PCBs with connector and component identification.
Wiring diagrams for various indoor unit models and their connections.
Wiring diagrams for various outdoor unit models and their connections.
Electrical schematic diagrams for indoor unit PCBs.
Electrical schematic diagrams for outdoor unit PCBs.
Guidelines for selecting suitable installation areas for indoor and outdoor units.
Procedure for connecting piping and purging the circuit before refrigerant refill.
Instructions for refilling refrigerant into the air conditioner.
Guidelines for adjusting refrigerant based on pipe length and installation conditions.
Torque specifications for fixing flare nuts during installation.
Procedure for 'pump down' operation when replacing or relocating the unit.
