Samsung MH18VF1X - Adjusting the Airflow Direction Vertically; Adjusting the Airflow Direction Horizontally

E-20
Transmitter Installation (Optional) (Continued)
 MH050FX  A2B/MH060FX  A3B/MH070FX  A4B / MH080FX  A4B
Accessories(Transmitter: MIM-B13)
Transmitter Transmitter power
cable
Transmitter
communication cable
Installation Manual Case Cable-tie
7seg. LED
Display side
Transmitter
Terminal
side
1
Fix the case with bolts on the control box in the outdoor unit.
(See the picture)
2
Attach the transmitter PCB to the case in the control box in the outdoor
unit, then connect the power and the communication cable between the
transmitter and the outdoor unit; refer to the figure of page 19.
3
If you install a transmitter to an outdoor unit, every indoor unit which is
connected to an outdoor unit can be controlled simultaneously.
4
Each outdoor unit connected to the same centralized controller has its
own transmitter.
Fix the case with bolts
(Control Box in the outdoor unit)
INSTALLING THE OUTDOOR UNIT
MH050FX

A2B
7seg. LED
Display side
Transmitter
Terminal
side
Bolts spec.
M4
Fix the case with bolts
(Control Box in the outdoor unit)
MH060FX

A3B/MH070FX

A4B / MH080FX

A4B
08'FJM_OUTDOOR_28896A_IM_E.indd 20 2007-12-12 14:28:26